Donnerstag, 22. Juni 2017

Sandcastle Daydream

This Tut is the product of my fantasy own
on 23 /06/2017
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X5, but also goes with other versions
The material used is subject to the creator and artist
 For doing this you need the PTU Sandcastle Daydream
What you can buy HERE
 mine is from
 VeryMany (Sheila)
 you can get HERE
 You do not need a mask for this
  
1.   
Open a new page in the size of 650 x 650 in
 transparency

2.
  Copy
Your tube
And paste it into your picture
Adjust image size
Move it in the middle

3.
Copy
Sandcastle Daydream (99)
Paste as new layer
Change image size to 45%
Move it to the left
Under grid2
Duplicate layer
Rotate the image vertically

4.
 Copy
Sandcastle Daydream (78)
Paste as new layer
Change image size to 45%
Move it to the right
Under Raster2

5.
 Copy
Sandcastle Daydream (111)
Paste as new layer
Change image size to 45%
Move it to the left
Under grid3
Duplicate layer
Rotate the image vertically
Move it to the right

6.
 Copy
Sandcastle Daydream (87)
Paste as new layer
Change image size to 50%
Move it down
Under Raster5

7.
 Copy
Sandcastle Daydream (129)
Paste as new layer
Change image size to 55%
Move it to the right
Under Raster4

8.
 Copy
Sandcastle Daydream (88)
Paste as new layer
Change image size to 65%
Move it down
Under Raster6

9.
 Copy
Sandcastle Daydream (89)
Paste as new layer
Change image size to 65%
Move it to the right
Under Raster6
Duplicate layer
Rotate the image vertically
Cover the two levels
Down together
Duplicate the layer
Move it under Raster8

10.
 Copy
Sandcastle Daydream (60)
Paste as new layer
Change image size to 45%
Move it under Raster2

11.
 Copy
Sandcastle Daydream (126)
Paste as new layer
Change image size to 50%
Move it to the right
Under Raster5
Duplicate layer
Rotate the image vertically

12.
Copy
Sandcastle Daydream (97)
Paste as new layer
Change image size to 65%
Put it underneath
Copy of Raster9

13.
 Copy
Sandcastle Daydream (21)
Paste as new layer
Change image size to 25%
Move it to the right
Under Raster10

14.
Copy
Sandcastle Daydream (136)
Paste as new layer
Change image size to 55%
Move it to the right
Under Raster6
 

15.
 Copy
Sandcastle Daydream (70)
Paste as new layer
Change image size to 20%
Move it to the right below
Duplicate layer
Rotate the image vertically
Move it to the left
Go back to level15
Duplicate it and
Increase it by 35%
Move as you like it
I have duplicated it twice
And turn it to the left
postponed

16.
 Copy
Sandcastle Daydream (18)
Take your selection tool
And surround the butterfly
Down right
Which is in the corner
Copy it
And paste it into your picture
Change image size to 45%
Move it to the left
 Put on your image the copyright
 Finished
save
As PNG or JPG
I hope you enjoyed the tutorial
Just like me write

2017 

Montag, 19. Juni 2017

USA GIRL

This Tut is the product of my fantasy own
on 14 /06/2017
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X5, but also goes with other versions
The material used is subject to the creator and artist
 For doing this you need the PTU USA GIRL
What you can buy HERE
mine is from
 VeryMany (July)
  you can get HERE
 You do not need a mask for this
 
 1.   
Open a new page in the size of 650 x 650 in
 transparency
   
2.
Copy
USA GIRL - frame4
Paste as new layer
Change image size to 90%
Move it in the middle
From your picture
 
3.
Copy
Go to your wand
And click once in the middle
From your frame
Change selection enlarge by 10px
Copy
USA GIRL - p10
Paste as new layer
Move it under your frame
Invert selection
Press on your button
DEL button
Deselect
 
4.
 Copy
United States GIRL - ele55
Paste as new layer
Change image size to 85%
Move it under Raster3
 
5.
 Copy
United States Girl - ele5
Paste as new layer
Change image size to 90%
Move it under Raster3
 
6.
 Copy
United States GIRL - ele60
Paste as new layer
Change image size to 55%
Move it to your frame
Down in the middle
 
7.
 Copy
United States GIRL - ele65
Paste as new layer
Change image size to 35%
Move it to the left side
Under Raster6
Duplicate layer
Rotate the image vertically
 
8.
 Copy
United States GIRL - ele29
Paste as new layer
Change image size to 45%
Move it to the right
Under Raster7
 
9.
 Copy
United States GIRL - ele10
Paste as new layer
Change image size to 70%
Move it to the right
Under Raster8
Take your delete tool
And etching on the left
Side the green handle
Duplicate layer
Rotate the image vertically
Duplicate it again
Image Flip Horizontal
Move it under Raster9
 
10.
 Copy
United States GIRL - ele24
Paste as new layer
Change image size to 35%
Move it to the right
Under Raster7
Duplicate layer
Rotate the image vertically
Move it to the left
 
11.
 Copy
United States GIRL - ele58
Paste as new layer
Change image size to 40%
Put it underneath
Copy (2) of Raster9
 
12.
Copy
United States GIRL - ele3
Paste as new layer
Change image size to 40%
Move it to the left
on
Copy of Raster11
Layer Duplicate Image vertically
 
13.
 Copy
Your tube
And paste it into your picture
Adjust image size
Move it under Raster11
 
14.
Copy
United States GIRL - ele4
Paste as new layer
Change image size to 40%
Move it to the left
Under your tubes
 
15.
  Copy
United States GIRL - ele2
Paste as new layer
Change image size to 65%
Move it to the right
Above
On your frame
 
16.
 Copy
United States GIRL - ele28
Paste as new layer
Change image size to 75%
Move it to the right
Under grid15
Duplicate layer
Rotate the image vertically
Move it to the left
 
17.
Copy
United States GIRL - ele15
Paste as new layer
Change image size to 65%
Move it to the right
Under Raster7
Duplicate layer
Rotate the image vertically
Move it to the left
 
18.
 Copy
United States GIRL - ele67
Paste as new layer
Change image size to 30%
Move it to the right below
 
19.
 Copy
United States GIRL - ele83
Paste as new layer
Change image size to 25%
Move it to the right
 
20.
 Copy
United States GIRL - ele49
Paste as new layer
Change image size to 80%
Move it in the middle
From your picture
 Finished
save
As PNG or JPG
I hope you enjoyed the tutorial
Just like me write
2017 
 
 


Mittwoch, 14. Juni 2017

Secret Memories

This Tut is the product of my fantasy own
on 14 /06/2017
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X5, but also goes with other versions
The material used is subject to the creator and artist
 For doing this you need the PTU Matches Tagger Kit Secret Memories
What you can buy HERE
 mine is from
 VeryMany (Angeline)
 you can get HERE
You do not need a mask for this
 
 1.   
Open a new page in the size of 650 x 650 in
 transparency
 
2.
Copy
Secret Memories Frames (8)
Paste as new layer
Change image size to 60%
 
3.
 Copy
Secret Memories (65)
Paste as new layer
Change image size to 40%
Move it to Raster2
And to the top
Duplicate layer
Image Flip horizontally
Go back to raster3 and duplicate it again
Rotate image 90 degrees to the left
Duplicate it one last time
Rotate the image vertically
 
4.
 Copy
Your tube
Paste as new layer
Adjust image size
Move it in the middle
From your picture
 
5.
 Copy
Secret Memories Frames (9)
Paste as new layer
Change image size to 30%
Move it under Raster2
 
6.
 Copy
Secret Memories Frames (3)
Paste as new layer
Change image size to 35%
Move it under Raster2
Duplicate layer
Image Flip horizontally
 
7.
 Copy
Secret Memories (67)
Paste as new layer
Change image size to 25%
Move it to Raster7
And left
Duplicate it 4 more times
And put it the way you like it best
 
8.
 Copy
Secret Memories (81)
Paste as new layer
Change image size to 20%
Move it down
Between the two flowers
Duplicate layer
Move it to the left
Duplicate layer
Rotate the image vertically
Move it to the right
Duplicate layer
Move it upwards
And finally one last time
duplicate
Rotate the image vertically
This plane you move
Under copy of Raster7
 
9.
Copy
Secret Memories (26)
Paste as new layer
Change image size to 30%
Move it to the left
 
10.
 Copy
Secret Memories (63)
Paste as new layer
Change image size to 30%
Move it to the left
Under grid3
Take your delete tool
And erase on the right side
The loop away
Duplicate layer
Rotate the image vertically
Move it to the right below
Go back to level 10
duplicate
Move it in the middle below
 
11.
 Copy
Secret Memories (3)
Paste as new layer
Change image size to 25%
Move it to the left
Duplicate layer
Move it to the left
Back to grid11
Duplicate layer
Rotate the image vertically
Move it to the top
 Finished
save
As PNG or JPG
I hope you enjoyed the tutorial
Just like me write
2017


Dienstag, 13. Juni 2017

Sea Of Enchantment

This Tut is the product of my fantasy own
on 13 /06/2017
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X5, but also goes with other versions
The material used is subject to the creator and artist
For doing this you need the PTU Sea Of Enchantment
 What you can buy HERE
 mine is from
 VeryMany (Seashell)
 you can get HERE
 you need a mask of your choice

 if you have everything together so we can begin

1.
 Open a new page in the size of 650 x 650 in
 transparency

2.
 Copy
Your tube
And paste it into your picture
Adjust image size
Move it in the middle
From your picture

3.
 Copy
Sea Of Enchantment (108)
Paste as new layer
Change image size to 50%
Move it to the left
And Raster2
Duplicate layer
Rotate the image vertically
Move it to the right

4.
 Copy
Sea Of Enchantment (109)
einfügen als neue Ebene
Bildgröße ändern auf 50%
verschiebe es nach Links
unter Raster3
verschiebe es es ein kleines Stück nach Oben

5.
 Copy
Sea Of Enchantment (7)
Paste as new layer
Change image size to 30%
Move it to the left
Under Raster2

6.
Copy
Sea Of Enchantment (177)
Paste as new layer
Change image size to 45%
Move it
Copy of Raster3

7.
 Copy
Sea Of Enchantment (172)
Paste as new layer
Change image size to 45%
Move it under Raster6

8.
 Copy
Sea Of Enchantment (12)
Take your selection tool
And surrounded a butterfly
By choice
Adjust image size
Move it to the left
Under grid5
Duplicate layer
Rotate the image vertically
Move it to the right below
I have the butterfly
Again duplicated
And put him up
Image free Rotating to choice

9.
 Copy
Sea Of Enchantment Papers (22)
Paste as new layer
Move it under Raster4
Go to levels
New Mask Level
From image
Look for a mask
Which you like
At luminance of the source
The check mark must be in it
And then press Ok
Sum up
Group
Change image size to 90%
Move it a little way up

10.
 Copy
Sea Of Enchantment (175)
Paste as new layer
Change image size to 80%
Move it to your mask level
Add the license to your image
in addition
Finished
save
As PNG or JPG
I hope you enjoyed the tutorial
Just like me write
2017 

Mittwoch, 19. April 2017

Mermaid Sea

This Tut is the product of my fantasy own
on 19 /04/2017
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X5, but also goes with other versions
The material used is subject to the creator and artist
For doing this you need the PTU Mermaid Sea
What you can buy HERE
mine is from
 VeryMany
 you can get HERE
you need a mask of your choice
 if you have everything together so we can begin
 
1.
 Open a new page in the size of 650 x 650 in
 transparency
 
2.
 Copy
MermaidSea (13)
Paste as new layer
Image Flip Vertical
Change image size to 70%
Move it a little to the left
 
3.
 Copy
MermaidSea (3)
Paste as new layer
Change image size to 50%
Move it to the left
On Raster2
 
4.
 Copy
Your Tube
And paste it into your picture
Adjust image size
Move it under Raster3
And a little bit to the left
 
5.
 Copy
MermaidSea (17)
Paste as new layer
Change image size to 50%
Move it under Raster2
And a little bit to the left
move
 
6.
 Copy
MermaidSea (6)
Paste as new layer
Change image size to 50%
Move it under Raster4
 
7.
 Copy
MermaidSea (18)
Paste as new layer
Change image size to 50%
Move it to the left
Under Raster6
 
8.
Copy
MermaidSea (52)
Paste as new layer
Change image size to 60%
Move under grid5
And a little bit to the left
 
9.
Copy
MermaidSea (54)
Paste as new layer
Change image size to 50%
Move it under Raster6
 
 
10.
 Copy
MermaidSea (25)
Paste as new layer
Change image size to 10%
Move it under Raster4
 
11.
 Copy
MermaidSea (27)
Paste as new layer
Change image size to 50%
Move it under Raster3
 
12.
Copy
MermaidSea (68)
Paste as new layer
Change image size to 45%
Move it to the left
Under Raster9
 
13.
 MermaidSea (65)
Paste as new layer
Change image size to 30%
Move it to the left
Under Raster4
 
14.
 Copy
MermaidSea (98)
Paste as new layer
Change image size to 25%
Move it to the left
On Raster3
 
15.
 Copy
MermaidSea (73)
Paste as new layer
Change image size to 25%
Move it to the left
Under Raster14
 
16.
 Copy
MermaidSea (87)
Paste as new layer
Change image size to 85%
Move it under Raster5
 
17.
 Copy
MermaidSea (56)
Paste as new layer
Change image size to 30%
Move it under Raster9
 
18.
 Copy
MermaidSea (32)
Paste as new layer
Rotate the image vertically
Change image size to 50%
Move it to the left
Under Raster12
 
19.
 Copy
MermaidSea (34)
Paste as new layer
Change image size to 65%
Move it under Raster4
 
20.
 Copy
MermaidSea (53)
Paste as new layer
Change image size to 35%
Move it to the right
Under Raster11
 
21.
 Copy
MermaidSea (94)
Paste as new layer
Change image size to 30%
Move it to the right
Under Raster21
 
22.
 Copy
Papers (8)
Paste as new layer
Move under Raster8
Go on levels
New Mask Level
From image
Look for a mask
Which you like
At luminance of the source
The check mark must be in it
And then press Ok
Sum up
Group
Change image size to 85%
Add the license to your image
Is added
Finished
Store it
As PNG or JPG
I hope you enjoyed the tutorial
Just like me write
2017

Mittwoch, 18. März 2015

Urban Hunk

This Tut is the product of my fantasy own
on 19 /03/2015
© The Tuts this lies solely with me
  It may not be copied and offered for download on the other side are
Any similarity is purely coincidental.I wrote it with Corel X3, but also goes with other versions
The material used is subject to the creator and artist
For doing this you need the PTU Urban Hunk
What you can buy HERE
mine is from
 VeryMany
 you can get HERE
 you need a mask of your choice
 if you have everything together so we can begin

1.
Open a new page in the size of 700 x 650 in
 transparency

2.
 Copy
Urban Hunk (18)
paste as new layer
Image Resize to 40%
move it slightly to the left

3.
 Copy
your tube
and paste it into your image
Resize Image
Flip image vertically

4.
 Copy
Urban Hunk (2)
paste as new layer
Image Resize to 40%
Flip image vertically
move it to the right
under Raster2

5.
 Copy
Urban Hunk (13)
paste as new layer
Image Resize to 30%
move it to the right
under Raster3

6.
 Copy
Urban Hunk frames (1)
paste as new layer
Image Resize to 60%
move it under Raster4

7.
 Copy
Urban Hunk (14)
paste as new layer
Image Resize to 35%
move it to the links below
in the corner

8.
 Copy
Urban Hunk (12)
paste as new layer
Image Resize to 50%
move it under Raster4

9.
 Copy
Urban Hunk (70)
paste as new layer
Image Resize to 50%
move it under Raster6

10.
 Copy
Urban Hunk Papers (1)
paste as new layer
move it under Raster9
Seeking Get your mask
the'd like to take you
then go to
levels
New Mask Layer
image
Add mask image
now turn your mask on
chop must at
Luminance of the source
and then press ok
summarize
Merge Group
Image Resize to 85%
move it a bit to the right
Duplicate level
Flip image vertically
  put your watermark and copyright
with your picture on
Levels of grouping
 summarize and save as JPG or PNG